Quick Answer: How Much Does It Cost To Repave An Asphalt Driveway?

Can I repave driveway myself?

If your driveway has bigger holes or cracks in a small area, you may be able to patch it yourself.

There are mixtures that fill the damage and then you tamp it down.

For larger areas, though, you will want to resurface.

Otherwise you’ll have to repair damage every year..

What can I do with an old asphalt driveway?

Drop the asphalt pieces off at your community recycling area, a local asphalt manufacturer or an asphalt recycler.

How long should an asphalt driveway last?

25-30 yearsThe life expectancy varies based on climate, traffic, and maintenance. It is possible to have asphalt pavement last 25-30 years, but this depends on how strong the base is, the soil types underneath, how well those soils drain, how think the original road, parking lot, or drivewaywas paved.

Should I resurface or replace my asphalt driveway?

While resurfacing is a great option for your driveway, it’s not always the best measure. … If your driveway is this old, our experts recommend completely replacing the asphalt. Likewise, if your driveway has too many cracks (1/3 of your driveway’s surface area), it may be more efficient to completely replace the asphalt.

How much does it cost to pave a 2000 sq ft driveway?

Paving an asphalt driveway costs $4,721 on average, with a typical range between $2,930 and $6,559. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

How much does it cost to resurface blacktop?

Cost to Resurface Asphalt Driveways The cost to resurface an asphalt driveway is a fraction of the price it costs to install a new driveway. Resurfacing costs approximately $2.25 per square foot. Patterns and colors cost more—around $4 to $8 per square foot.

How often do you need to resurface asphalt driveway?

every three yearsAsphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing.

What is the cheapest way to pave a driveway?

Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice. If you have more wiggle room, you’ll have more choice.

How long will an asphalt overlay last?

If an overlay is desired, there has to be an expectation of the customer that this method is not as long-lasting as a full removal and replacement. A 15-20 year life on a removal and replacement is common, whereas an overlay may last a shorter time, about 10-15 years.

Why is my new asphalt driveway not smooth?

If your asphalt isn’t smooth and there are loose rocks scattered over the surface, or if you can kick loose small bits of asphalt or aggregate, it’s very likely your pavement wasn’t compacted properly.

How much does it cost to redo your driveway?

Expect to pay about $2.25 per square foot for basic driveway resurfacing. So a typical residential driveway of 750 square feet would cost about $1,687. If you want patterns or colors, you need to pay more, around $4 to $8 per square foot, or $3,000 to $6,000 for a 750-square-foot driveway.

How much does it cost to pave a 100 foot driveway?

Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.

Does paving driveway increase home value?

Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. … While they increase the value of your home, a nice paved driveway can also help sell your home FASTER. And who doesn’t want to do that!

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

Can you blacktop over grass?

The short answer to this is that, yes, fake grass can be installed on top of asphalt or concrete. … A paving surface can be deteriorated but still maintain structural integrity in which an asphalt overlay is the proper solution. An existing asphalt surface is the best base for new asphalt.

Can you put new asphalt over old asphalt?

A #404 surface course of asphalt can be installed on top of existing asphalt. Since the product used for both layers is the same, the layers should heave together in the winter. … Putting new asphalt on top of existing problems won’t make them go away. The time to correct them is before you install the new asphalt.

How long does it take to repave a driveway?

Under most conditions, you will be able to drive on the driveway within two to three days. But it can take 30 days or more for asphalt to fully cure. During that time, you can use the driveway as normal.

Is asphalt same as blacktop?

The materials that are used to make blacktop and asphalt are the same. Both are made from two ingredients: bitumen and crushed stone. The difference lies in how those ingredients are combined to make the final product.